Concrete
Coval Concrete is a thin-film, single component coating designed to seal, enhance and protect concrete surfaces.
It creates a covalent bond with the coating substrate and is easily and quickly applied with an acetone pump sprayer. Coval Concrete is used on floors, retaining walls, infrastructure, and all forms of precast concrete.
Coval Concrete forms a chemically resistant barrier to protect against staining, etching, and graffiti; allowing for easy cleaning, reduced maintenance costs for labor and materials, and less dependence on harsh cleaning chemicals. Coval Primer is required to be applied to more porous concrete prior to Coval Concrete.
Learn More
Coval Concrete is the best protective option for any porous or semi-porous concrete surface, including floors, walls, precast, or structural applications.
Decorative Flooring
Concrete floors are popular all over the world. Our coating is ready to use and is single component, so there is no measuring or mixing involved. Use Coval Primer as a base for more porous concrete, then apply Coval Concrete for superior protection.
Industrial Applications
Coval Concrete is long lasting and easy to apply, making it ideal for industrial floors, walls, and infrastructure where performance is key.
White Floor, Solid Color & Striped Floors
Keep white, pigmented, and striped floors looking great with minimal maintenance. Coval coatings are strong enough for the activity on your manufacturing plant or airplane hangar floors while remaining easy to clean.
Precast Protection
Keep public spaces looking impressive and inviting with minimal maintenance. Use Coval Concrete to protect precast tables, benches, containers, and bollards from exposure to outdoor abuse.
Graffiti Prevention
Paint or marker graffiti can be cleaned off Coval Concrete with mild detergents or simple solvents such as isopropyl alcohol without damaging or altering the appearance of the underlying substrate.
Frequently Asked Questions
Coval bonds to standard concrete, polished concrete, stamped concrete, decorative concrete, and existing coated concrete (with proper surface preparation). Its molecular bonding chemistry is not dependent on surface porosity, making it suitable for a wide range of concrete types.
Coval Concrete Coating can be applied in different sheen levels. For a natural-look finish, it adds minimal visual change. For enhanced sheen, use with the Coval Ultimate Top Coat. To achieve matte or satin finishes, add the Coval Matting Agent. Discuss finish options with your Coval representative.
Epoxy is a thick, film-forming coating that relies on mechanical adhesion. It can peel, chip, and requires full strip-down before recoating. Coval creates a molecular bond with the concrete, is ultra-thin, and is repairable without stripping. Coval UTC can also be applied over existing epoxy to enhance protection.
Yes. Coval is UV stable and weather resistant, making it suitable for exterior concrete including driveways, patios, facades, and outdoor walkways.
Coval’s molecular bond is highly durable and resistant to the failure modes — peeling, delamination — that reduce the lifespan of traditional concrete coatings. With proper application and maintenance, Coval provides significantly longer service life than comparable mechanical-adhesion coatings.
In most cases, yes — with appropriate surface preparation. Contact your Coval representative for guidance on your specific substrate and existing coating condition.
Coval contains less than 100g/L VOCs and no known carcinogens under California’s Proposition 65. However, as with any coating application, adequate ventilation is recommended during and after application.
Repairing Coval is straightforward: clean the damaged area, allow it to dry completely, and apply a fresh coat of Coval. The new coat forms a covalent bond with the existing coating, creating a seamless repair. No stripping or grinding is required.